Showing posts with label Safety. Show all posts
Showing posts with label Safety. Show all posts

May 5, 2010

Starting Off On The Right Foot(ing)

All homes sit on a footing. Not all footings were created equal. Our home's current footing is of the inferior sort  - there's a picture to prove it. All footings run around the perimeter of a home. Newer ones are made of concrete with steel (rebar) embedded. If you reside in a very old home, this may not be the case. Your house may be perched upon a brick foundation with a beach sand mortar or some other type of a footing which is no longer deemed safe. Inferior footings cause greater settling or uneven downward or upward movement of a home. This will result in interior and exterior cracks - and that's no joke. Plus, you could have doors and windows that don't open and close properly. If you live in California or another earthquake prone state, you should be particularly concerned about having a solid footing. The footing locks the home into the earth which helps reduce movement and damage. A good footing should be coupled with proper shear walls with hold-downs. A shear wall is a wall in a home that has plywood anchored to the studs, the top plate and the foundation (from the ceiling down to the foundation). A hold-down anchors the shear walls to the foundation. After that very brief and non-technical explanation of footings and shear walls, let me tell you what I'm dealing with.

Our present footing is too narrow for the home and it's not deep enough. We're digging underneath the existing footing without destroying it. This saves money and time. Then we're pouring a wider and deeper concrete footing with rebar. This has to be done in sections and we'll install lots of hold-downs and shear walls around the house in the process. In our case, the hold downs will anchor our shear wall to both the existing and new footings.

April 2, 2010

It's a Dirty Job But Somebody's Gotta Do It...

Guess who? Alliance Environmental Group Inc. will be doing the less than dainty job of cleaning up the hazardous waste in the house. There are many guidelines that must be followed in order to safely remove hazardous waste. Because Alliance has been doing this for over 50 years, they are a company I can trust to create a safe environment for residents and neighbors. Since the future inhabitants probably don't have any desire to produce children with three eyes, Alliance will first remove lead paint from the exterior of the house. As if this weren't enough, they will be removing asbestos ridden, 80 year old vinyl flooring from the kitchen floor (that's ancient stuff for you tweeting surfers of the net). In order to remove these materials safely, Alliance seals the home and creates a negative pressure to insure that hazardous particles are contained. The Alliance team dons fancy lead dust respirators and haz mat suits to boot- watch out VALENTINO! This keeps workers at Alliance from ingesting and contacting the nasty things that lurked in the old home.










An unfortunate example of stucco on top of the original wood siding of the home. Good riddance!

January 19, 2010

Let's Roll Up Our Sleeves and Get Started!

Welcome everyone!  This is an exciting moment for me, since it's my first blog.  (Bear with me on just about everything.)  This is going to be a great adventure in every way.

My ambitions for making this house green are pretty big, and I'm not sure that I'll be able to fulfill all of them. But I'm knocking on wood (I mean fiberglass). I'll be up front with you about all the costs and obstacles that I face and how my plans for this project may change along the way as a result.  Here's a list of my green goals:
  1. Wrapping the house in insulation to exceed the R-values required by LA City code.
  2. Installing a grey-water recovery system that also includes rainwater capture.
  3. Incorporating a solar thermal system for hot water and radiant floor heating.
  4. Setting up both a photovoltaic and a wind turbine system to supplement electrical energy from the grid.
  5. Replacing existing windows with Marvin's Integrity line of dual-glazed low-e fiberglass windows.
  6. Using an underground irrigation system (tied to the grey-water recovery) that drastically reduces runoff and evaporation and, therefore, the amount of water needed to grow a green lawn.
  7. Improving water conservation through a dual-flush toilet, low-flow shower head and faucets, and a tankless water heater (to be used as a default to the solar thermal system).
  8. Using LED lights instead of fluorescent or incandescent light bulbs and installing dimmers.
  9. 80% recycling of hauled debris.
  10. Painting walls with low or no VOC products.
  11. Remodeling the kitchen with low-impact appliances and finish material (Energy Star, etc.)
  12. Having the house certified by LEED and/or Build It Green.
While I was thinking about this blog, I was also laying the groundwork for beginning this green remodel. Thus far, I've:
  • Cleaned up site (removed debris and dead shrubs).
  • Connected with LEED Accredited Professional/architect Shuji Kurokawa and architectural colorist Karen Kurokawa of Impact Design, Inc. (http://www.impactdesigninc.com/) to discuss the remodel.
  • Drew plans of existing house, site and proposed changes (no added square footage).
  • Engineered underpinning and shear panels.
  • Submitted plans to Los Angeles Department of Building and Safety, addressed corrections, and received permits to start the remodel.
But I haven't started yet.  Why you may ask?  I want to ensure that this project is safe for those who will work on the house, those who will eventually live in the house and for the environment.  Therefore, due to the age of the house, I needed to test the old paint for the percentage of lead content and the kitchen's vinyl floor for asbestos content.  Samples were taken from the interior and exterior and sent to a lab for analysis.  I just received the results today.  Big surpise!  This old house has asbestos and lead. Now I've got to find the right contractor to safely remove and dispose of these materials.