Showing posts with label Green Goals. Show all posts
Showing posts with label Green Goals. Show all posts

April 30, 2010

Energy Star Goes Above and Beyond

You know that cute little blue star that we see on all kinds of appliances today? It's the Energy Star logo and it's actually a joint program between the Environmental Protection Agency  and the U.S. Department of Energy. Energy Star has helped saved enough energy just in 2009 to avoid greenhouse gas emissions equivalent to those of 30 million cars. Moreover, Energy Star appliances saved users nearly $17 billion on their utility bills.
Let me get to my point. I'm sure you are all aware of Energy Star's Appliances. But did you know that cool or green roofs are now earning the Energy Star label? Yup. Über reflective Energy Star roofs:
  • reflect more of the sun's rays. This can lower roof surface temperature by up to 100F, decreasing the amount of heat transfer into a building.
  • can last longer before needing replacement, because high temperatures, among other factors, shorten the lifespan of roofing materials. Cool roofs also help lower the air temperature surrounding houses, which helps fight the "heat island effect"—increased air temperature (2 to 8 degrees Fahrenheit) in cities versus rural areas.
  • can help reduce the amount of air conditioning needed in buildings, and can reduce peak cooling demand by 10-15 percent. 
So I should buy an Energy Star roof, right? It's the perfect time to install one since the house needs a roof anyhow. BUT and this is a supersized-MacDonald's-rear-end kind of BUT - these roofs cost a pretty penny.

They are approximately 50% more than what you'd pay for the composition itself on a standard roof. The installation costs are the same for Energy Star and standard roofs. So I ran the numbers on the house to calculate my yearly savings with an Energy Star roof. I also took into consideration the 30% federal tax credit that people receive when they install an Energy Star roof.

If you too are trying to figure out what's what in the world of cool roofing, you've also got to think about:

-- engineered lumber for framing (engineered wood is made from wood fibers bound with adhesives, resulting in less wood waste than solid-sawn lumber).
-- low or no formaldehyde strand board.
-- recycled newsprint or recycled newsprint and agricultural fibers for roof decking to eliminate waste.
-- Structural Insulated Panels (SIPs) for building a roof. This reduces the amount of framing lumber and cuts energy losses.
--roofing felt made from recycled paper products reduces landfill and saves on the demand for natural resources.
--metal roofing from recycled steel or aluminum utilizes wastes and saves energy, and the durability reduces replacement and maintenance costs. 
--shingles made from recycled materials such as sawdust, cement, recycled rubber etc. puts waste to good use and provides lasting performance.
-- using different materials depending upon the pitch of your roof. Solar Reflectance Index requirements for an Energy Star rating are different for low and high pitched roofs.

So, I'm still in a quandary. I know it's the green thing to do, but I've got a budget to consider and lots of other projects and tasks to finish before using up all of my cash. So let me know, what do you think I should do?






A recent picture of our ceilings after the exterior and interior have been stripped. I wonder what will cover those rafters...

January 19, 2010

Let's Roll Up Our Sleeves and Get Started!

Welcome everyone!  This is an exciting moment for me, since it's my first blog.  (Bear with me on just about everything.)  This is going to be a great adventure in every way.

My ambitions for making this house green are pretty big, and I'm not sure that I'll be able to fulfill all of them. But I'm knocking on wood (I mean fiberglass). I'll be up front with you about all the costs and obstacles that I face and how my plans for this project may change along the way as a result.  Here's a list of my green goals:
  1. Wrapping the house in insulation to exceed the R-values required by LA City code.
  2. Installing a grey-water recovery system that also includes rainwater capture.
  3. Incorporating a solar thermal system for hot water and radiant floor heating.
  4. Setting up both a photovoltaic and a wind turbine system to supplement electrical energy from the grid.
  5. Replacing existing windows with Marvin's Integrity line of dual-glazed low-e fiberglass windows.
  6. Using an underground irrigation system (tied to the grey-water recovery) that drastically reduces runoff and evaporation and, therefore, the amount of water needed to grow a green lawn.
  7. Improving water conservation through a dual-flush toilet, low-flow shower head and faucets, and a tankless water heater (to be used as a default to the solar thermal system).
  8. Using LED lights instead of fluorescent or incandescent light bulbs and installing dimmers.
  9. 80% recycling of hauled debris.
  10. Painting walls with low or no VOC products.
  11. Remodeling the kitchen with low-impact appliances and finish material (Energy Star, etc.)
  12. Having the house certified by LEED and/or Build It Green.
While I was thinking about this blog, I was also laying the groundwork for beginning this green remodel. Thus far, I've:
  • Cleaned up site (removed debris and dead shrubs).
  • Connected with LEED Accredited Professional/architect Shuji Kurokawa and architectural colorist Karen Kurokawa of Impact Design, Inc. (http://www.impactdesigninc.com/) to discuss the remodel.
  • Drew plans of existing house, site and proposed changes (no added square footage).
  • Engineered underpinning and shear panels.
  • Submitted plans to Los Angeles Department of Building and Safety, addressed corrections, and received permits to start the remodel.
But I haven't started yet.  Why you may ask?  I want to ensure that this project is safe for those who will work on the house, those who will eventually live in the house and for the environment.  Therefore, due to the age of the house, I needed to test the old paint for the percentage of lead content and the kitchen's vinyl floor for asbestos content.  Samples were taken from the interior and exterior and sent to a lab for analysis.  I just received the results today.  Big surpise!  This old house has asbestos and lead. Now I've got to find the right contractor to safely remove and dispose of these materials.